Cocktail Audio™ UK Support Forum

Can anyone tell me what the latest version of the webgui is and where I can download it from?

The webgui used to work fine, but since I upgraded the firmware on my X10, the webgui does not appear to work as well as it used to. Perhaps I need to update the webgui too, but I cannot find where I forest got it from!!

On the web gui go to settings ( hover your mouse pointer over 'music db ' and select settings tab.
on new screen select UPDATE tab and just follow instructions

I can not access the Web GUI interface anymore on my IPad. I have tried entering the IP address etc without any success. Has anybody else had this problem

Becos your "music db" needs to be updated, install the 1760 & update the web-gui - it will be fine.

Have the most up to date firmware and still can't get the web page interface. Can't connect to server is the error message. Any ideas

Just a thought... The IP address of your X10 might have changed. Check on the X10 itself.

Or just use the host name instead ?
eg //X30, //X10, or http://x10
If you named the device another name like http://JesusMusicServer ...it will load the web-gui

_________________
I cast this burden on the Christ within, and go free.......

Hi - I have the problem of not being able to access the webgui. I have had this for a while, but only had the time today to work through possible solutions. None have worked. I have tried with wired and wireless connections, and have the correct IP address for both. All I get is Oops, Google Chrome could not connect to192.168.0.X. Or if I try from my ipad, I get Safari cannot open the page because the server cannot be found.

I have:
- cleared the cache
- checked the IP addresses on the Cocktail for wired and wired connections
- successfully pinged the IP addresses
- gone into my router interface and checked that the Cocktail is listed as connected (by mac address)
- rebooted and rebooted and checked and rechecked.
- used both IP address and X10 to connect
- turned off my firewall
- done an NTFS fix
- reinstalled the web server.

During all this, the Cocktail is connected - I can see it listed on my computer and can access the files from there.

I am using Win 8.1; also cross checking with iPad and iPhone, and have cross checked using another computer.
I have the latest firmware (1760) and a Virgin Superhub router.

The only thing that bothers me in all this checking (apart from being no further on) is that when I locate the CA on my router as a connected item, it doesn't have a name - just identifyable by the IP address and mac address. Does that have any bearing?

If there is anything that I haven't checked, I would be grateful for any pointers.

Thanks

What is the status on the "web server" ?
What is the host name on the cocktail audio - check the smb option at setup?
I would reconnect the network on the cocktail audio.

Webserver says "on"
Host Name is "X10"

I think I have reconnected the network, but if you could talk me through how you would do it, I can check if I did that thing.

Thanks.